Zhangjiagang Apollo Machinery Co.,ltd.
Zhangjiagang Apollo Machinery Co.,ltd.
Add to Cart
Plastic 5L Jerrycan Production HDPE Extrusion Blow Molding Machine
| Basic Information | |||
| Machine Type | Extrusion Blowing Machine, TVHED-5L | ||
| Max Volume | 3L | ||
| Double/Single Station | double stations | ||
| Mono-layer/Multi-layer | single layer | ||
| Mould Cavity | 1 cavity(based on product weight and shape) | ||
| Total Power | 50 kw | ||
| Details | |||
| 1) Fewer manual processes involved with deflashing unit; | |||
| 2) hybrid system(hydraulic +servo motor driving); clean and easy to operate; | |||
| 3) The clamping unit is in 2 platen design, fast and stable in movement; | |||
Basic installation including
| Max. Product volume8 | 8 liters |
| Screw diameter | 75mm |
| Screw L/D ratio | 24 L/D |
| Screw drive power | 22KW |
| Screw heating capacity | 7-8KW |
| No.of heating zone | 4 zones |
| Output of HDPE | 100KG/H |
| Oil pump drive power | 7.5 KW |
| Clamping force | 80KN |
| Max.size of mold | 400x430mm |
| Mold stroke | 170-520mm |
| Template size | 380 X 420mm |
| Max.die diameter | 170mm |
| Blowing pressure | 0.6 mpa |
| Air Volume | 0.8M³/MIN |
| Cooling water pressure | 0.3mpa |
| Water consumption | 80L/MIN |
| Size of Machine | 4.2x2.2x2.7m |
| Weight of machine | 7.5ton |
| electronic parts | |
| Name | Trader |
| Micro computer control system | WIRETECH from TAIWAN/MUTISUBISHI |
| Temperature Controller | WIRETECH from TAIWAN/MUTISUBISHI |
| Auxiliary Relay | OMRON |
| contactor | Schneider from France |
| Electric motor | Schneider from France Three phase 380V |
| Power Source | TAIWAN MEANWELL |
| Transducer | ABB from Switzerland |
| hydraulic parts | |
| Name | Trader |
| Oil pump | HIGH-TECH |
| Valve | YUKEN |
| Sealed part | HALLITE |
| air control system | |
| Name | Trader |
| Cylinder | AIRTAC |
| Air Valve | AIRTAC |
